National Instruments cFP-DO-403 Manual de usuario descargar pdf (Pagina 10)

[c]FP-DO-403 10 ni.com

Caution For Zone 2 applications, install a protection

device across the external power supply and the COM

terminal. The device must prevent the external power

supply voltage from exceeding 42 V if there is a transient

overvoltage condition.

Special Conditions for Hazardous Locations Use in Europe

The [c]FP-DO-403 has been evaluated as EEx nC IIC T4

equipment under DEMKO Certificate No. 03 ATEX 0251502X.

Each module is marked II 3G and is suitable for use in Zone 2

hazardous locations.

Specifications

These specifications are typical for –40 to 70 °C unless otherwise

noted. Specifications are subject to change without notice.

Output Characteristics

Number of channels .......................... 16

Output type ....................................... Sinking

Voltage range .................................... 5 to 30 VDC

Output impedance............................. 0.12 Ω

(0.12 V drop at 1 A)

Maximum current

Per channel ................................. 2 A

All channels

FP-DO-403........................... 16 A

cFP-DO-403......................... 16 A

at –40to60 °C

12 A

at 60 to 70 °C

Maximum OFF state leakage............ 50 μA

Output delay time ............................. 50 μs

Physical Characteristics

Indicators .......................................... Green POWER and

READY indicators, 16 green

output state indicators

Weight

FP-DO-403 ................................. 140 g (4.8 oz)

cFP-DO-403 ............................... 110 g (3.7 oz)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Sin comentarios

National Instruments cFP-DO-403 Manual de usuario Pagina 10