National Instruments Gigabit Ethernet Adapters Manual de usuario descargar pdf

INSTALLATION GUIDE

PCI/PXI Gigabit Ethernet Adapters

National Instruments gigabit Ethernet adapters are based on the

Intel 82540-compatible Ethernet controller.

This document explains how to install and troubleshoot the Ethernet drivers

for your PCI/PXI board. Some boards also contain additional functionality

(for example, GPIB). Refer to the documentation that came with your kit to

install the software for the other functionality.

Installing Your PXI Board

Complete the following steps to install the Ethernet adapter:

1. Shut down Windows, if it is running, by selecting Start»Shut Down.

2. Power off your PXI or CompactPCI chassis. Keep the chassis plugged

in so that it remains grounded as you install the adapter.

3. Remove the filler panel from a PXI peripheral bus master slot. The

adapter requires a bus master slot to take advantage of the onboard

DMA and Ethernet controllers. All PXI chassis and most CompactPCI

chassis contain only bus master slots. Refer to your chassis

documentation to verify you are using a bus master slot.

4. Touch a metal part on your chassis to discharge any static electricity

that might be on your clothes or body.

5. Insert the adapter into the selected bus master slot. Use the

injector/ejector handle to fully inject the device into place.

6. Screw the front panel of the adapter to the front panel mounting rail

of the PXI or CompactPCI chassis.

1 2 3 4 5 6 ... 16 17

Indice de contenidos

Pagina 1 - Installing Your PXI Board

INSTALLATION GUIDEPCI/PXI Gigabit Ethernet AdaptersNational Instruments gigabit Ethernet adapters are based on the Intel 82540-compatible Ethernet con

Pagina 2 - Connect the Network Cable

PCI/PXI Gigabit Ethernet Adapters Installation Guide 10 ni.comTip If Windows displays an Insert Disk dialog box or indicates it cannot locate a file o

Pagina 3 - Install the Drivers

Pagina 4 - Windows Me/98

PCI/PXI Gigabit Ethernet Adapters Installation Guide 12 ni.comNote When installing adapters on a Windows NT system that does not have any other adapte

Pagina 5 - Windows 98

Pagina 6

PCI/PXI Gigabit Ethernet Adapters Installation Guide 14 ni.comWOL558.VXD Missing or Not Found (Windows 98 Only)This error can occur in Windows 98 if a

Pagina 7 - Windows 2000/XP

Pagina 8 - Windows 2000

PCI/PXI Gigabit Ethernet Adapters Installation Guide 16 ni.comPCI/PXI Installation TipsPCI/PXI computers are designed to automatically configure add-i

Pagina 9 - Windows XP

National Instruments™, NI™, NI-488.2™, and ni.com™ are trademarks of National Instruments Corporation. Product and company names mentioned herein are

Pagina 10 - Windows NT 4.02

PCI/PXI Gigabit Ethernet Adapters Installation Guide 2 ni.comInstalling Your PCI BoardComplete the following steps to install the Ethernet adapter:1.

Pagina 11

Pagina 12

PCI/PXI Gigabit Ethernet Adapters Installation Guide 4 ni.comWindows Me/98Complete the following steps to install the drivers:1. Shut down, then power

Pagina 13 - Troubleshooting

Pagina 14

PCI/PXI Gigabit Ethernet Adapters Installation Guide 6 ni.comIf Windows asks where to search for a new driver, make sure the box next to CD-ROM Drive

Pagina 15

Pagina 16 - PCI/PXI Installation Tips

PCI/PXI Gigabit Ethernet Adapters Installation Guide 8 ni.com2. Install the hardware and cables, then power on the computer, as shown in the following

Pagina 17 - *370620C-01*

Comentarios a estos manuales

Sin comentarios

National Instruments Gigabit Ethernet Adapters Manual de usuario

Busca en linea o descarga Manual de usuario para Redes National Instruments Gigabit Ethernet Adapters. National Instruments Gigabit Ethernet Adapters User's Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Redes National Instruments Gigabit Ethernet Adapters