National Instruments 5441 Manual de usuario descargar pdf (Pagina 4)

NI 5441 Specifications 4 ni.com

Accuracy

DC Accuracy For the Low-Gain or High-Gain Amplifier Path:

±0.2% of Amplitude ± 0.05% of Offset ± 500 µV

(within ±10 °C of self-calibration temperature)

±0.4% of Amplitude ± 0.05% of Offset ± 1mV

(0 °C to 55 °C)

All paths are

calibrated for

amplitude and

gain errors. The

Low-Gain and

High-Gain

Amplifier Paths

also are

calibrated for

offset errors.

For the Direct Path:

Gain Accuracy: ±0.2% (within ±10 °C of self-calibration

temperature)

Gain Accuracy: ±0.4% (0 °C to 55 °C)

DC Error: ±30 mV (0 °C to 55 °C)

AC Amplitude

Accuracy

±1.0% of Amplitude ± 1mV 50 kHz sine

wave.

Output Characteristics

Output

Impedance

50 Ω nominal or 75 Ω nominal, software-selectable. —

Load

Impedance

Compensation

Output amplitude is compensated for user-specified load

impedances.

—

Output

Coupling

DC —

Output

Enable

Software-selectable. When disabled, CH 0 out is terminated

with a 1 W resistor with a value equal to the selected output

impedance.

—

Maximum

Output

Overload

The CH 0 output can be connected to a 50 Ω, ±12 V

(±8 V for the Direct Path) source without sustaining any

damage. No damage occurs if the CH 0 output is shorted to

ground indefinitely.

—

Waveform

Summing

The CH 0 output supports waveform summing among

similar paths—specifically, the outputs of multiple NI 5441

signal generators can be connected together.

—

Specification Value Comments

1 2 3 4 5 6 7 8 9 ... 43 44

Comentarios a estos manuales

Sin comentarios

National Instruments 5441 Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control National Instruments 5441