National-instruments Isolated Analog Input Modules SCC-AI03 Manual de usuario Pagina 3

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 14
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 2
© National Instruments Corporation 3 SCC-AI Series Isolated Analog Input Modules User Guide
What You Need to Get Started
To set up and use the SCC-AI, you need the following items:
Hardware
SCC-68
or
SC-2345/2350 with one of the following:
SCC-PWR01
SCC-PWR02 and the PS01 power supply
SCC-PWR03 (requires a 7 to 42 VDC power supply,
not included)
One or more SCC-AI
68-pin E/M Series DAQ device
68-pin cable
Quick Reference Label
Software
The latest version of NI-DAQmx
Documentation
SCC-AI Series Isolated Analog Input Modules User Guide
SC-2345/2350 User Manual
SCC-68 User Guide
or
SCC Quick Start Guide
Read Me First: Safety and Radio-Frequency Interference
Documentation for your hardware
Documentation for your software
Tools
1/8 in. flathead screwdriver
Numbers 1 and 2 Phillips screwdrivers
Wire insulation stripper
Note Software scaling of measurements is not supported on the Macintosh operating
system. Refer to the SCC-AI Module Pin Assignments section.
Vista de pagina 2
1 2 3 4 5 6 7 8 ... 13 14

Comentarios a estos manuales

Sin comentarios