National-instruments FP-RTD-122 Manual de usuario descargar pdf (Pagina 3)

To install the cFP-RTD-122, refer to Figure 2 and complete the

following steps:

1. Align the captive screws on the cFP-RTD-122 with the holes

on the backplane. The alignment keys on the cFP-RTD-122

prevent backward insertion.

2. Press firmly to seat the cFP-RTD-122 on the backplane.

3. Using a number 2 Phillips screwdriver with a shank of at least

64 mm (2.5 in.) length, tighten the captive screws to 1.1 N ⋅ m

(10 lb ⋅ in.) of torque. The nylon coating on the screws prevents

them from loosening.

Figure 2. Installing the cFP-RTD-122

1 cFP-RTD-122

2 Captive Screws

3 cFP Controller Module

4 Screw Holes

5 cFP Backplane

3 5

1 2 3 4 5 6 7 8 ... 14 15

Sin comentarios

National-instruments FP-RTD-122 Manual de usuario Pagina 3