National-instruments SCB-68 Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Chapter 1 Introduction
© National Instruments Corporation 1-5 SCB-68 Shielded Connector Block User Manual
Figure 1-1. SCB-68 Parts Locator Diagram
Installing Cables
The following sections describe how to cable one or more SCB-68
connector blocks to a DAQ device using 68-pin or 100-pin cables.
Note For the I/O connector pinout of the DAQ device, refer to the device user manual at
ni.com/manuals or to the quick reference label provided with the DAQ device.
Using 68-Pin Cables
Table 1-1 lists the 68-pin cable assemblies that can connect the SCB-68 to
a 68-pin DAQ device. Each end of these 68-pin cables has a 68-pin I/O
connector that you can connect to the SCB-68 and to the 68-pin DAQ
device. In this configuration, the I/O connector pinout on the DAQ device
determines the I/O connector pinout on the SCB-68.
1 Quick Reference Label
2 Cover
3 68-Pin Connector
Screws
4 Lock Washers
5 Shielding Screws
6 68-Pin I/O Connector
7Base
8 Strain-Relief Bars
9 Strain-Relief Screws
10 Circuit Card Assembly
2
3
4
5
7
9
8
1
10
6
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 103 104

Comentarios a estos manuales

Sin comentarios