National-instruments Two-Slot Embedded Controller NI PXI-8183 Manual de usuario descargar pdf (Pagina 25)

Chapter 2 Installation and Configuration

NI PXI-8183 User Manual 2-12 ni.com

System CMOS

The NI PXI-8183 contains a backed-up memory used to store

BIOS configuration information.

Complete the following steps to clear the CMOS contents:

1. Power off the chassis.

2. Remove the controller from the chassis.

3. Move the jumper on J1 from pins 1–2 to pins 2–3, as shown in

Figure 2-3.

4. Wait one second. Move the jumper back to pins 1–2.

5. Reinstall the controller in the chassis.

Caution Do not leave the jumper on pins 2-3. Doing so decreases battery life.

Figure 2-3. Clearing the CMOS Contents (NI PXI-8183 Shown)

1Normal Operation (Default) 2Clear CMOS Contents 3 Pin 1

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 68 69

Sin comentarios

National-instruments Two-Slot Embedded Controller NI PXI-8183 Manual de usuario Pagina 25